Stuff on the table - March 2018

Here we go for March:

Zvezda 1/144th Ju-87 Stuka (2017)

Revell 1/144th Me-262 (2016)

Artizan/North Star 28mm Dark Confederate Zombies x4 (2017)

Artizan/North Star 28mm Jackalope (2017)

Newline Designs 10mm Roman Hastati x31 (2016)

Newline Designs 10mm Celtic Warband x31 (2016)

The 10mm Punic Wars project is progressing steadily. The aim was to complete 30 a month so I'm slightly ahead on this. Similarly to this time last year I've been spending more time playing guitar than painting. But it'll even itself out as the year goes on no doubt. 

Stuff on the table - February 2018 UPDATE

Updates for Feb:

Zvezda 1/144th Ju-87 Stuka (2017) - no further progress

Revell 1/144th Me-262 (2016) - no further progress

Artizan/North Star 28mm Dark Confederate Zombies x4 (2017) - main painting complete

Artizan/North Star 28mm Jackalope (2017) - no further progress

Newline Designs 10mm Roman Triarri x31 (2016) - details painted, varnished, based, COMPLETED

Additional items worked on:

Newline Designs 10mm Roman Hastati x31 (2016) - cleaned up, primed, main painting complete

Newline Designs 10mm Celtic Warband x31 (2016) - started clean up

Purchases:

Enough Pre-cut premium bases from Warbases to base all the infantry for the 10mm Punic Wars project. Total expenditure for the month £10.18 - get in there!

Stuff on the table - February 2018

Blimey where did January go? Here's what's on the go for February:

Zvezda 1/144th Ju-87 Stuka (2017)

Revell 1/144th Me-262 (2016)

Artizan/North Star 28mm  Dark Confederate zombies x4 (2017)

Artizan/North Star 28mm Jackalope (2017)
NewlineDesigns 10mm Roman Triarri x30 (2016)

Stuff on the table - January 2018 UPDATE

Here's what I got up to in January:

• Zvezda 1/144th Ju-87 Stuka (2017) - no further progress
• Revell 1/144th Me-262 (2016) - assembly completed
• Newline Designs 10mm Roman Princeps x30 (2016) - painted, varnished, based COMPLETED

Additional items worked on:

• Artizan/North Star Dark Confederate zombies x4 (2017) - cleaned up and primed
• Artizan/North Star Jackalope (2017) - cleaned up and primed
• Newline Designs 10mm Roman Triarri x30 (2016) - cleaned up, primed, main painting complete

I've set myself the target of 30 10mm Punic Wars figures a month which means I should complete by October/November time. I'm slightly ahead as I'm just completing the details on the Triarri as we finish January. They'll be varnished and based ealy in Feb. Probably wise to switch focus and then gear up for another batch at the end of the month.

January Purchases

Privateer Press Cryx Bloodgorgers. These were an absolute bargain at £17.60 for a painted unit of 10. They retail at around £60! The paintjob is ok. I'll leave the metals and redo the skin and bases. 

6xArmy Painter washes. My stockpiled Citadel ones are finally running out so I thought I'd give these a go. I also restocked a few essential Vallejo paints and bought a set of Javis fine sable brushes to help with all that 10mm painting.

And that was it, quite restrained. I'm happy with what I've got on the go so no need to buy anything more.

First 10mm - Greek Hoplites

At end of last year I finally managed to complete my first 10mm figures. Here they are, a unit of Greek Hoplites from Newline Designs.

 

These were originally purchased back in 2015 as a test to see if 10mm were a viable option. During painting I got very fed up and they were banished from the painting desk to the drawer of shame. However, I had invested in over 300 10mm Punic Wars figures by that stage and realised I needed to grasp the nettle as it were and finish them off. 

After the basic painting was complete they sat there for ages while I mulled over how to do the shields. I initially looked at decals, but decided it would be torturous in this small scale. Therefore, I bought a set of very nice Sakura Pigma Micron Colour Pigment Fineliners which enabled me to do the shield designs. 

I then dithered about how to base them and was looking on the Warbases site when I came across the Minihammer range. As the only Ancients rules I own is the original Warhammer Ancient Battles set, these made perfect sense and I am really pleased with the consistency and quality of the bases. I've used circular Warbases for my Burrows and Badgers and Early War 28mm as well. 

Finishing this lot has set me up nicely for cracking on with the Punic Wars project which I first conceived in 2016. They'll be more of that later in the month and hopefully through the year.

Stuff on the table - January 2018

Happy New Year to everyone let's hope it's a good one! Here's what I've got on the go as we start the year:

• Zvezda 1/144th Ju-87 Stuka (2017)
• Revell 1/144th Me-262 (2016)
• Newline Designs 10mm Roman Princeps (2016)

I only have 28mm or 10mm figures outstanding at the moment having painted up all the 15mm last year. The plan (and we all know what happens to plans) is to crack on with the 10mm but also have a few 28mm on the go as well to give some variety. I find that when you'be been painting a smaller scale and then when you work on a 28/32mm figure they seem really easy to paint.